Home > p2p > uTorrent: settings

uTorrent: settings

10 Giugno 2009

italian

Download the client from HERE.
Install the client.
In Speed Guide, set the correct Connection Type.
Click on Use Selected settings.

uTSpeed

When uTorrent (uT) starts go in Menu – Option – Preferences

In the Directories Tag, select the custom path for temporary and complete download.

uT_dir

In Connection tag, set the Port used for incoming connections.

uT_connection
Each port correctly configured can be used but I like 5061, or 1720, or 7070.
(If you are under a router/firewall, check the port is correctly forwarded!!!)

In Bandwidth Tag, set the Maximum upload rate to your Max Bandwidth Upload value – 10KB.

uTBand
This value is KB (KByte), not Kb (bit).
(i.e.) if your Max Bandwidth Upload value is 512Kb the value will be (512/8) – 10 =54KB
Subtract 10/15KB from upload limit is useful to browse internet while the client uT, is uploading torrents.
Set the Maximum number of connected peers per torrent to your max Bandwidth Download value / 50.
In my case 8Mb (bit) / 50 = 160
Set the Global Maximum number of connections to the previous value per 3.
In my case 160 * 3 = 480

In Bittorrent tag enable the outgoing Protocol encryption.

uT_encrypted

In Advanced Tag

uTAdv
set the netmax_halfopen value to 30
set the peer.lazy_bitfield value to True (default).

Click on Apply Button and restart utorrent to fix the changes.

Categorie:p2p Tag:
I commenti sono chiusi.